1.Press Settings to access the Quick Settings menu.
2.Scroll to Picture Format or Picture Size. (You will only see the Picture Size if the Set Picture Format is set to Pass-Through in the General Settings menu.)
3.Press 
or 
to view the options.
4.As you scroll through the options, notice how the picture on the screen changes.
5.Select the picture size and/or format of your choice.
Press Settings twice to display the General Settings menu. Then, choose
one of the following options.
Fixed—The screen resolution you selected from the Setup Wizard can be seen in the Quick Settings menu. The screen resolution remains the same (fixed) until you change it.
Pass-Through—This option provides a built-in convenience factor. The set-top attempts to convert the signal of an incoming program to the best picture format for your HDTV screen. However, if you have not selected all the screen resolutions that are available, the screen resolution defaults to the best selection available based the selections you made in the HDTV Setup Wizard.
Upconvert 1 and Upconvert 2—The operation of these two options is similar
to that of the Pass-Through option. See the Display Formats For Digital Sources table on the next page.
Auto DVI—If your HDTV is connected through the DVI port, you will see this option and not the Pass-Through option. Incoming programming is automatically formatted to the scan rate supported by your HDTV.
