Seagate Enterprise Value manual Drive mounting, Mounting dimensions

www.seagate.com

3.4Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom- mounting holes. Refer to Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:

•Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.

•Use only 6-32 UNC mounting screws.

•The screws should be inserted no more than 0.150 inch (3.81mm) into the bottom or side mounting holes.

•Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

Weight: (maximum)

4TB models

606g (1.33 lb)

Note	These dimensions conform to the Small Form Factor Standard documented
	in SFF-8301 and SFF-8323 found at www.sffcommittee.org
Figure 5 Mounting dimensions

Note	PCBA may not be representative of the actual PCBA on drive.
Seagate Terascale HDD Product Manual, Rev. B		20