![](/images/new-backgrounds/1109850/10985047x1.webp)
3.4DRIVE MOUNTING
You can mount the drive in any orientation using four screws in the
•Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling as a guideline. Please refer to Section 3.5 for final cooling requirements.
•Use only M3 x 0.5 metric mounting screws.
•Four (4) threads (0.080 in) minimum screw engagement recommended. Also ensure maximum screw length does not bot- tom out in mounting holes.
•Do not overtighten the mounting screws (maximum torque: 4.5
Refer to Figure 3 for detailed mounting configuration dimensions.
Weight: | 7mm models | 0.220 pounds | 100 grams |
Note. These dimensions conform to the Small Form Factor Standard documented in
Figure 3. Mounting configuration dimensions (7mm models)
SEAGATE 600 PRO SSD PRODUCT MANUAL, REV. A | 20 |