Seagate ST3500410SV, ST3250311SV manual Drive specification, ST31000525SV, Vibration, nonoperating

Drive specification	ST31000525SV
Vibration, nonoperating	5-22 Hz: 2.0 Gs, Limited displacement
	22-350 Hz: 5.0 Gs
	350-500 Hz: 2.0 Gs
Drive acoustics, sound power
Idle**	2.7 bels (typical)
	2.9 bels (max)
Seek	2.8 bels (typical)
	3.0 bels (max)
Nonrecoverable read errors	1 per 1014 bits read
Annualized Failure Rate (AFR)	0.80%
Warranty	To determine the warranty for a specific drive, use a web browser to access the following
	web page: www.seagate.com/support/service/
	From this page, click on the “Verify Your Warranty” link. You will be asked to provide the
	drive serial number, model number (or part number) and country of purchase. The system
	will display the warranty information for your drive.
Contact start-stop cycles	50,000 at 25°C, 50% rel. humidity
Supports Hotplug operation per the	Yes
Serial ATA Revision 2.5 specification

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

SV35.5 Series SATA Product Manual, Rev. A 5