Manuals / Seagate / Computer Equipment / Computer Hardware

Seagate ST31000424CS, ST3250312CS manual Drive mounting, Mounting dimensions for 1000GB models

Models: ST3160316CS ST3320413CS ST31000322CS ST31000424CS ST3250412CS ST3500414CS ST3500312CS ST3250312CS

1 50
Download 50 pages 5.86 Kb
Page 31
Image 31
3.4Drive mounting

3.4Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer to Figure 3 for drive mounting dimensions. Follow these important mounting pre- cautions when mounting the drive:

•Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.

•Use only 6-32 UNC mounting screws.

•The screws should be inserted no more than 0.150 inches (3.81mm) into the bottom or side mounting holes.

•Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

Recommended case temperature

measurement location

Figure 3. Mounting dimensions (for 1000GB models)

Pipeline HD.2 Series SATA Product Manual, Rev. E

23

Page 30 Page 32
Page 31
Image 31
Seagate ST31000424CS, ST3250312CS, ST3250412CS, ST3500414CS manual Drive mounting, Mounting dimensions for 1000GB models
Page 30 Page 32