DISK DRIVE ST34520W
Mounting and Option Information
There is a new hard drive, SEAGATE
This drive is a wide SCSI drive. To use it in a DEFAUD or an R1 you need the SCSI adapter for it - Com Code 407 846 245.
The drive is used now in the AUDIX SLIM. To use it on a DEAUD with the adapter, the hard drive needs to be spaced out from the drive bracket to clear the parts on the TN2169 behind the hard drive, even then it will be a tight fit.
Use MOTOR START and PARITY and SCSI ID of 0 for DEFAUD. SCSI ID is needed for the R1 AUDIX, terminator disable is required.
It is recommended that the Shielded SCSI Cable - Com Code 601 866 163 - be used with this disk drive because it is shorter and more flexible.
Information from Wayne Motycka (2/24/99) and www.seagate.com :
DEFINITY AUDIX needs no option straps, but R1 AUDIX does.
TN566B/567
| AC | S |
| d o | C |
| a n | S |
| p n | I |
|
| |
ST 34520W | t e | C |
cc 407 942 135 | e c | a |
b | ||
| r t | l |
| o | e |
| r |
|
Tape Drive
Power Supply
SCSI Cable Adapter | HDD SCSI Cable Connector |
cc 407 846 245 |
|
ST 34520W |
Mounting Bracket |
Anchor Plate |
Disk Drive Shielded SCSI Cable
cc601 866 163
Power Supply
Circuit Board (TN566B/567 Circuit Board component
Required air gap between Circuit Board components and SCSI
Cable adapter and connector, this gap wil be extremely small, this picture shows a considerable gap that overstates the space. The tech will need to assure that he can see light under the adapter.
February 25, 1999 | 1 |
