4.3.1Identify Device command

The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 5 on page 21. All reserved bits or words should be set to zero. Parameters listed with an “x” are drive-specific or vary with the state of the drive. See Section 2.0 on page 3 for default parameter settings.

The following commands contain drive-specific features that may not be included in the Serial ATA specifica- tion.

Word

Description

Value

 

 

 

 

Configuration information:

0C5AH

 

• Bit 15: 0 = ATA; 1 = ATAPI

 

0

• Bit 7: removable media

 

 

• Bit 6: removable controller

 

 

• Bit 0: reserved

 

 

 

 

1

Number of logical cylinders

16,383

 

 

 

2

ATA-reserved

0000H

3

Number of logical heads

16

 

 

 

4

Retired

0000H

5

Retired

0000H

6

Number of logical sectors per logical track: 63

003FH

7–9

Retired

0000H

10–19

Serial number: (20 ASCII characters, 0000H = none)

ASCII

20

Retired

0000H

21

Retired

0400H

22

Obsolete

0000H

23–26

Firmware revision (8 ASCII character string, padded with blanks to end of

x.xx

 

string)

 

 

 

 

27–46

Drive model number: (40 ASCII characters, padded with blanks to end of

ST3500641NS

 

string)

ST3500841NS

 

 

 

47

(Bits 7–0) Maximum sectors per interrupt on Read multiple and Write

8010H

 

multiple (16)

 

 

 

 

48

Reserved

0000H

49

Standard Standby timer, IORDY supported and may be disabled

2F00H

50

ATA-reserved

0000H

51

PIO data-transfer cycle timing mode

0200H

52

Retired

0200H

53

Words 54–58, 64–70 and 88 are valid

0007H

54

Number of current logical cylinders

xxxxH

55

Number of current logical heads

xxxxH

56

Number of current logical sectors per logical track

xxxxH

57–58

Current capacity in sectors

xxxxH

59

Number of sectors transferred during a Read Multiple or Write Multiple

xxxxH

 

command

 

 

 

 

NL35 Series 7200.2 SATA Product Manual, Rev. C

23

Page 28 Page 30
Page 29
Image 29
Seagate ST3500641NS, ST3500841NS manual Identify Device command, Word Description Value
Page 28 Page 30

ST3500641NS, ST3500841NS specifications

The Seagate ST3500841NS and ST3500641NS are robust hard drives specifically designed for enterprise environments, catering to the demanding needs of data centers, server farms, and storage solutions. These drives are part of Seagate's enterprise series and reflect a commitment to reliability, performance, and capacity.

One of the main features of the ST3500841NS and ST3500641NS is their impressive storage capacity. The ST3500841NS offers 500GB of storage, while the ST3500641NS provides a slightly lower capacity at 640GB. Both drives utilize a standard 3.5-inch form factor, making them suitable for a variety of server and storage configurations. They operate at a high spindle speed of 7200 RPM, which contributes to faster data access and overall improved performance compared to traditional 5400 RPM drives.

These drives are designed to sustain high workloads and feature a mean time between failures (MTBF) rating that ensures reliability over extended periods of operation. With their enhanced error correction capabilities, data integrity is maintained even under heavy loads, making these drives ideal for use in critical applications where data loss is not an option.

The integration of technologies such as Native Command Queuing (NCQ) enhances the performance of these drives in multi-user environments. NCQ allows the drive to optimize the order of read and write commands, reducing latency and improving overall throughput. Furthermore, the ST3500841NS and ST3500641NS both feature an SATA interface, supporting speeds of up to 3.0 Gb/s, which is the standard for modern storage solutions.

Another noteworthy characteristic of these drives is their energy efficiency. Despite their robust performance, the ST3500841NS and ST3500641NS are designed to consume less power, thereby reducing operational costs and contributing to a more sustainable data center environment.

In summary, the Seagate ST3500841NS and ST3500641NS are purpose-built for enterprise applications, offering a blend of capacity, performance, and reliability. Their advanced technologies, coupled with impressive MTBF ratings and energy efficiency, make them suitable for critical applications in various high-demand environments. Whether utilized in small server systems or large-scale data centers, these drives provide the robust performance that businesses require in today’s data-driven landscape.
Top Page Image Contents