Introduction, Momentus 5400.1 disc drive | Seagate ST92011A specification

1.0Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate® Momentus™ 54 drives:

•ST94011A

•ST94811A

•ST92011A

•ST92811A

These drives provide the following key features:

•5,400-RPM spindle speed and 2-Mbyte buffer (8 Mbytes on ST94811A and ST92811A models) combine for superior performance.

•Quiet operation. Fluid Dynamic Bearing (FDB) motor.

•High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5.

•Tunneling Magnetoresistive (TMR) recording heads.

•State-of-the-art cache and on-the-fly error-correction algorithms.

•Full-track multiple-sector transfer capability without local processor intervention.

•800 Gs nonoperating shock, and 225 Gs operating shock.

•SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

•The 3D Defense System™, which includes Drive Defense, Data Defense, and Diagnostic Defense, offers the industry’s most comprehensive protection for disc drives.

•Support for S.M.A.R.T. drive monitoring and reporting.

•Support for Read Multiple and Write Multiple commands.

•Support for autodetection of master/slave drives that use cable select (CSEL).

Figure 1. Momentus 5400.1 disc drive

Momentus 5400.1 Product Manual, Rev. F

1

Image 7

Seagate ST92011A, ST94811A, ST94011A, ST92811A manual Introduction, Momentus 5400.1 disc drive

Contents

ST94011A ST94811A ST92011A ST92811A MomentusPage Contents Momentus 5400.1 Product Manual, Rev. F List of Figures Momentus 5400.1 Product Manual, Rev. F Momentus 5400.1 disc drive Introduction Momentus 5400.1 Product Manual, Rev. F Drive specification ST94011A ST94811A ST92011A ST92811A Drive specificationsSpecification summary Specifications Specifications Physical organization Default logical geometryLBA mode Formatted capacity Technology Specification Physical characteristicsRecording and interface technology Time to ready Typical Max Seek timeTime to ready Typical seek times msec Read Write Power specifications Conducted noise Typical current profileVoltage tolerance Idle mode Power-management modesPower management modes Active mode Environmental specifications Vibration ShockOperating shock Nonoperating shock Electromagnetic immunity AcousticsElectromagnetic immunity Drive level acoustics Agency certification Safety certificationMeasurement type Specification Reliability Australian C-Tick N176 Korean RRLFCC verification Page Master/slave configuration Configuring and mounting the driveHandling and static discharge precautions Jumper settings Cable-select option Drive mounting Cable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact Conductor Supported commands Supported ATA commandsCommand name Command code in hex ATA-standard commands ATA-standard power-management commands Command name Command code in hexATA-standard security commands Supported commands Word Description Value Identify Device command Xx07H Bit Word Description if bit is set to Bit Word Features register values Set Features command Supported S.M.A.R.T. commands 4 S.M.A.R.T. commandsCode in features register A.R.T. command Momentus 5400.1 Product Manual, Rev. F Tested systems Installation considerationsCompatibility summary System Compatibility Operating systems tested Bios versions testedTested Bios versions Operating system versions tested Vendor Application Compatibility test configurationsSoftware utilities Other certification Momentus 5400.1 Product Manual, Rev. F Technical Support Seagate Technology support servicesInternet Presales Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage Page Momentus 5400.1 Product Manual, Rev. F Page Seagate Technology LLC