Manuals / Seagate / Computer Equipment / Computer Drive

Seagate ST973402SS manual Transmitter signal characteristics, Signal characteristica Units Gbps

Models: ST973402SS ST9146802SS

1 84
Download 84 pages 36.64 Kb
Page 70
Image 70

9.5.2.2Transmitter signal characteristics

Table 27 specifies the signal requirements at the transmitter end of a TxRx connection as measured into the zero-length test load. All specifications are based on differential measurements.

The OOB sequence is performed at signal voltage levels corresponding to the lowest supported transfer rate. Table 27 specifies the signal characteristics.

Table 27: Transmitter signal characteristics

Signal characteristica

Units

1.5 Gbps

3.0 Gbps

Skewb

ps

20

15

Tx Off Voltagec

mV(P-P)

< 50

< 50

Maximum rise/fall timed

ps

273

137

Minimum rise/fall timed

ps

67

67

Maximum transmitter output imbalancee

%

10

10

OOB offset deltaf

mV

± 25

± 25

OOB common mode deltag

mV

± 50

± 50

aAll tests in this table shall be performed with zero-length test load shown in figure 19.

bThe skew measurement shall be made at the midpoint of the transition with a repeating 0101b pattern on the physical link. The same stable trigger, coherent to the data stream, shall be used for both the Tx+ and Tx- signals. Skew is defined as the time difference between the means of the midpoint crossing times of the Tx+ signal and the Tx- signal.

cThe transmitter off voltage is the maximum A.C. voltage measured at compliance points when the transmitter is unpowered or transmitting D.C. idle (e.g., during idle time of an OOB signal).

dRise/fall times are measured from 20 % to 80 % of the transition with a repeating 0101b pattern on the physical link.

eThe maximum difference between the V+ and V- A.C. RMS transmitter amplitudes measured on a CJTPAT test pattern (see 9.5.2.3.3) into the test load shown in figure 19, as a percentage of the average of the V+ and V- A.C. RMS amplitudes.

fThe maximum difference in the average differential voltage (D.C. offset) component between the burst times and the idle times of an OOB signal.

gThe maximum difference in the average of the common mode voltage between the burst times and the idle times of an OOB signal.

64

Savvio 10K.2 SAS Product Manual, Rev. D

Page 69 Page 71
Page 70
Image 70
Seagate ST973402SS, ST9146802SS manual Transmitter signal characteristics, Signal characteristica Units Gbps
Page 69 Page 71

ST973402SS, ST9146802SS specifications

The Seagate ST973402SS and ST9146802SS are high-performance, enterprise-grade hard drives designed to meet the demanding needs of data-intensive applications. These drives are part of Seagate's Savvio and Barracuda product lines, aimed specifically at businesses and institutions requiring reliability, speed, and efficiency in storage solutions.

The ST973402SS is a 73GB, 2.5-inch hard drive, while the ST9146802SS offers a larger capacity of 146GB. Both models utilize a 10,000 RPM spindle speed, which significantly enhances their ability to handle fast data read and write operations. This speed ensures reduced latency and improved overall performance, making them ideal for environments where rapid access to data is crucial.

One of the standout features of these drives is their support for Serial Attached SCSI (SAS) interface. SAS technology provides a point-to-point connection, which allows for increased data transfer rates compared to traditional SATA drives. The ST973402SS and ST9146802SS are capable of transferring data at speeds of up to 600 MB/s, facilitating efficient data transfers in enterprise systems.

In terms of reliability, both models offer advanced features designed to improve data integrity and durability. They are built to withstand high workloads, with an annualized workload rate of up to 550 TB per year. This makes them well-suited for applications like databases and transactional storage, where sustained performance is required. Additionally, the drives feature Seagate’s PowerFit technology, which optimizes performance while minimizing power consumption.

To enhance data security, the drives come equipped with self-encrypting technology, ensuring that sensitive data is protected through hardware-based encryption. This is particularly important in environments where data breaches can lead to significant operational impacts.

The drives are also designed to operate efficiently in terms of thermal management, featuring robust heat dissipation capabilities. This helps to maintain optimal performance levels while prolonging the lifespan of the drives.

Overall, the Seagate ST973402SS and ST9146802SS are robust and reliable hard drives that cater to the needs of enterprise environments, combining high capacity, exceptional speed, advanced security features, and energy efficiency to help businesses maintain and manage large volumes of data effectively. With their proven performance and innovative technologies, these drives are well-equipped to support a wide range of applications in modern data centers.