2 
b
a
EN 1. Unpack the box.
2.Connect the Seagate NAS.
a.Connect the Ethernet cable from the Seagate NAS to your router.
b.Connect the power adapter from the Seagate NAS to a power outlet.
NOTE: Do not connect the Seagate NAS directly to your computer; connect the computer through a router to the Seagate NAS.
3.Press the power button on the Seagate NAS. Wait for the LEDs on the front panel to stop blinking. This may take a couple of minutes.
4.Insert the DVD. Follow the on-screen instructions to complete the setup.
FR 1. Déballez le produit.
2.Connectez le serveur NAS Seagate.
a.Connectez le câble Ethernet du serveur NAS Seagate à votre routeur.
b.Branchez le cordon d’alimentation du serveur NAS Seagate sur une prise de courant.
REMARQUE : Ne connectez pas le serveur NAS Seagate directement à votre ordinateur. Utilisez votre routeur comme intermédiaire entre votre ordinateur et le serveur NAS.
3.Appuyez sur le bouton de marche/arrêt du serveur NAS Seagate. Attendez que les voyants du panneau avant cessent de clignoter. Cela peut prendre quelques minutes.
4.Insérez le DVD. Suivez les instructions à l’écran pour terminer l’installation.
ES 1. Desembale la caja.
2. Conecte Seagate NAS. |
a. Conecte el cable Ethernet desde Seagate NAS al enrutador. |
b. Conecte el adaptador de corriente desde Seagate NAS a un |
EN WWW.SEAGATE.COM
Visit us at our Support pages for assistance with:
•Installation: Additional instructions and troubleshooting assistance
•Warranty Information
To contact support, visit us at our Contact Us page.
NOTE: To protect your data, always follow the safe removal procedures for your operating system when disconnecting your product.
FCC DECLARATION OF CONFORMANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CLASS B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
FR WWW.SEAGATE.COM
Consultez les pages de support technique de notre site pour toute question relative aux points suivants :
•Installation : Instructions supplémentaires et assistance dépannage
•Informations sur la garantie
Pour contacter le support technique, consultez la page Nous contacter.
REMARQUE : Pour protéger vos données, suivez toujours les procédures de retrait sécurisé correspondant à votre système d’exploitation lors de la déconnexion du produit.
ES WWW.SEAGATE.COM
Consulte nuestras páginas de asistencia técnica para recibir ayuda sobre:
•Instalación: Instrucciones adicionales y asistencia para la resolución de problemas
•Información de garantías
Para ponerse en contacto con el servicio de asistencia técnica, consulte nuestra página Contacto.
NOTA: Para proteger sus datos, asegúrese de seguir los procedimientos de extracción segura de su sistema operativo siempre que desconecte el producto.
100710042
| Business |
Storage |
2-BAY | |
| NAS |
QUICK | START | GUIDE |
|
| |
NOTA: No conecte Seagate NAS directamente a la computadora; conecte la computadora a Seagate NAS mediante un enrutador.
3.Presione el botón de encendido de Seagate NAS. Espere que los indicadores LED en el panel frontal terminen de parpadear. Esto puede demorar algunos minutos.
4.Inserte el DVD. Siga las instrucciones en pantalla para completar la configuración.
© 2012 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, and the Wave logo are trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one thousand billion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions and will not be available for data storage. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit
www.bis.doc.gov). Seagate reserves the right to change, without notice, product offerings or specifications.
Seagate Technology LLC
10200 S. De Anza Blvd.
Cupertino, CA 95014 U.S.A.
PN: 100710042 06/12
