No valve or other obstruction is to be placed between the relief valve and the tank. Do not connect tubing directly to discharge drain unless a 6 inch air gap is provided. To prevent bodily injury, hazard to life, or property damage, the relief valve must be allowed to discharge water in quantities should circumstances demand. If the discharge pipe is not connected to a drain or other suitable means, the water flow may cause property damage.

The Discharge Pipe:

•Shall not be smaller in size than the outlet pipe size of the valve, or have any reducing couplings or other restrictions.

•Shall not be plugged or blocked.

•Shall be of material listed for hot water distribution.

•Shall be installed so as to allow complete drainage of both the temperature-pressure relief valve, and the discharge pipe.

•Shall terminate at an adequate drain.

•Shall not have any valve between the relief valve and tank.

The temperature-pressure relief valve must be manually operated at least once a year. Caution should be taken to ensure that

(1)no one is in front of or around the outlet of the temperature- pressure relief valve discharge line, and (2) the water manually discharged will not cause any bodily injury or property damage because the water may be extremely hot.

If after manually operating the valve, it fails to completely reset and continues to release water, immediately close the cold water inlet to the water heater, follow the draining instructions, and replace the temperature-pressure relief valve with a new one.

FIGURE 10.

Filling the Water Heater

Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating element, the tank must be filled with water. Water must flow from the hot water faucet before turning “ON” power.

To fill the water heater with water:

1.Close the water heater drain valve by turning the handle to the right (clockwise). The drain valve is located on the lower front of the water heater.

2.Open the cold water supply valve to the water heater.

NOTE: The cold water supply valve must be left open when the water heater is in use.

3.To insure complete filling of the tank, allow air to exit by opening the nearest hot water faucet. Allow water to run until a constant flow is obtained. This will let air out of the water heater and the piping.

4.Check all new water piping for leaks. Repair as needed.

11

Page 10 Page 12
Page 11
Image 11
Sears 153.321342, 153.321842, 153.321442, 153.321643, 153.321543, 153.321642, 153.321843, 153.321343 Filling the Water Heater
Page 10 Page 12

153.321443, 153.321442, 153.321643, 153.321342, 153.321842 specifications

The Sears models 153.321343, 153.321843, 153.321543, 153.321542, and 153.321642 represent a collection of versatile and innovative products that highlight Sears' commitment to quality and functionality. These models are notable for their distinct features and technologies that cater to a variety of consumer needs.

One of the main characteristics common to these models is their robust build quality. Each model is designed using durable materials that ensure longevity and resilience against wear and tear. This is particularly important for consumers looking for reliable products that can withstand daily use.

In terms of technological features, these models are equipped with advanced functionalities that enhance user experience. For instance, the inclusion of smart technology allows for seamless integration with home automation systems. This enables users to control aspects of the device through mobile applications or voice commands, ensuring convenience and accessibility.

Another noteworthy aspect is their energy efficiency. These models are designed with energy-saving features that help reduce overall power consumption without compromising performance. This is not only environmentally friendly but also translates to cost savings for consumers in the long run.

The versatility of the Sears models is evident in their wide range of applications. Each model is tailored to meet specific needs, whether for household tasks or specialized functions, making them suitable for a variety of users. This adaptability makes the models appealing to a broader audience, from casual users to more demanding consumers.

Moreover, these models often incorporate user-friendly interfaces. Easy-to-navigate controls and clear displays allow users to operate the devices without the need for extensive instructions, making them ideal for individuals of all ages and technological backgrounds.

Sears continues to provide exceptional customer support and warranty options with these models, further enhancing customer satisfaction and trust. This commitment to service ensures that buyers feel secure in their purchase, knowing they have support should any issues arise.

In conclusion, the Sears models 153.321343, 153.321843, 153.321543, 153.321542, and 153.321642 exemplify the brand's dedication to quality, innovation, and user-centered design. With their durable construction, advanced technology, energy efficiency, versatility, and strong customer support, they stand out in a competitive market, appealing to a wide range of consumers seeking reliable and multifunctional products.
Top Page Image Contents