important: read and save this safety and instruction manual.

1.important safety instructions

Before using your Travel Inverter 120, read and understand this Owner’s Manual.

1.1Keep the inverter well ventilated in order to properly disperse heat gener- ated while it is in use. Make sure that there are several inches of clear- ance around the top and sides and do not block the slots of the inverter.

1.2Make sure the inverter is not close to any potential source of flammable fumes, gases or clothing.

1.3Keep the inverter dry.

1.4DO NOT allow the inverter to come into contact with rain or moisture.

1.5DO NOT operate the inverter if you, the inverter, the device being operat- ed or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury.

1.6Do not place the inverter on or near heating vents, radiators or other sources of heat.

1.7Do not place the inverter in direct sunlight. The ideal air temperature for operation is between 50° and 80°F.

1.8Do not use the inverter near an open engine compartment.

1.9Only connect the travel inverter to a 12-volt accessory outlet.

1.10Make sure the AC plug connection is tight.

1.11Do not modify the AC or USB receptacle in any way.

1.12Use only 15 amp fuses.

1.13Incorrect operation of your inverter may result in damage and personal injury. WARNING: The inverter output is 110V AC and can shock or elec- trocute the same as any ordinary household AC wall outlet.

WARNING: Pursuant to California Proposition 65, this product contains chemicals known to the State of California to cause cancer and birth de- fects or other reproductive harm.

1

Page 3
Image 3
Sears 200.71520 operating instructions Important safety instructions