3.Now tighten the four bolts from step 1.

4.Assemble a bag rod clip to the inside of each lower handle tube using a curved head bolt secured down against the clip using a 1/4" lock nut. The open end of the clips should face towards the sweeper housing. See figure 3.

7.Assemble the two plastic rod caps to the rod ends of the bottom bag rod. Assemble two Palnuts to the ends of the top bag rod. See figure 5.

FIGURE 5

FIGURE 3

5.Slide the long bag rod (28-1/2" long) through the stiched bag flap on the top of the hopper bag as shown in figure

4.

6.Slide the short bag rod (25-1/2" long) through the stiched bag flap on the bottom of the hopper bag as shown in figure 4.

FIGURE 4

8.Assemble the two plastic caps 3/4" x 7/8" onto the ends of the leg stands as shown in figure 6.

FIGURE 6