3.Slide the upper end of a Handrail (85) into the right Upright (82) as shown. Note: It will be necessary to pivot the Handrail to the side and back repeatedly (see arrow A) while pushing on the Handrail (see arrow B) to slide it fully into the Upright. Next, pivot the lower end of the Handrail down, push it toward the right Upright, and then align it with the indicated hole.

Slide the other Handrail (85) onto the left Upright (82) as described above.

4.With the help of a second person, carefully tip the Uprights (82) down as shown. Make sure the Extension Legs (103) remain inserted into the Uprights. Attach one of the Extension Legs with two of the four Short Screws (101) as shown. Attach the other Extension Leg in the same way.

Tighten a Handrail Bolt (78) with a Handrail Washer (96) into the right Extension Leg (103) and the lower end of the right Handrail (85) as shown. Note: It may be neces- sary to move the Handrail up or down to align the Handrail with the hole in the Extension Leg.

Next, tighten a Handrail Bolt (78) with a Handrail Washer

(96)into the left Extension Leg (103) and the lower end of the left Handrail (85).

With the help of a second person, carefully tip the Uprights (82) back to the upright position.

3

 

 

 

 

 

 

 

B

 

 

82

85

 

 

 

 

 

 

 

 

 

 

82

 

85

 

 

 

 

 

 

A

 

 

 

 

 

Hole

4

 

 

 

 

 

 

 

 

82

 

 

 

 

101

 

 

 

 

96

85

 

 

85

 

82

 

101

103

78

 

 

 

 

 

96

 

 

103

 

 

78

 

 

 

 

 

5.Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill.

6

Page 6
Image 6
Sears 535LE user manual