Pressure Washer Rinsing
WARNING! Be extremely careful if you use the pressure washer from a ladder, scaffolding or any other relatively unstable location. Pressure in a running washer builds as you climb. When you press the trigger, the recoil from the initial spray could cause you to fall. The high pressure spray could also cause you to fall if you are too close to the cleaning surface.
For Rinsing:
•Slide the nozzle backward to high pressure, press the trigger and wait for the detergent to clear.
NOTE: You can also stop detergent flow by removing detergent siphoning tube from container.
•Keep the spray gun a safe distance from the area you plan to spray.
•Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning.
•Start at the top of the area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent.
Automatic Cool Down System
(Thermal Relief)
If you run the engine on your pressure washer for
OWNER'S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU COMPLETE
HOURLY OPERATING
REGULAR SERVICE
MAINTENANCE TASK
PRESSURE WASHER Check/clean water inlet screen Check hiah pressure hose
INTERVAL
Before
Each Use
X1
x
SERVICE DATES
Check deteraent hose
Check spray gun and assembly for leaks
Purae DumD of air and contaminants Prepare pump for storaqe below 32°F
ENGINE Check oil level Chanae enaine oil Service air cleaner Service spark Dlua Service spark arrester Prepare for storage
x•
X
x
See "St0raqe on ,age !3.
x ........
x=
x3
x
x
If unit is to remain idle for
longer than 30 days.
1Clean if clogged. Replace if perforated or torn.
2Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Change sooner when operating under dirty or dusty conditions.
Replace more often under dirty or dusty conditions.
