_,_

i

ill i

ii,

iillllll

lUl/iJll

i

PURGE TRANSMISSION

freewheel lever while the engine is run-

CAUTION: Never engage or disengage ning,

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air'inside the transmission which may have devel- oped during shipping of your tractor.

IMPORTANT: SHOULDYOURTRANSMISSION REQUIRE

REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION

BEFORE OPERATING THE TRACTOR.

Place tractor safely on level surface with engine off and parking brake set.

Disengage transmission by placing freewheel control in freewheeling position (See 'q'OTRANSPORT" in this section of manual)_

Sitting in the tractor seat, start engine° After the engine is running, move throttle control to slow (,,J_) position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal

Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times.,

NOTE: During this procedure there wil! be no movement of drive wheels° The air is being removed from hydraulic drive system.

°Move motion controllever to neutral (N) position. Shut- off engine and set parking brake.

Engage transmission by placing freewheel control in driving position(See "TO TRANSPORT" in this section of manua!).

°Sitting inthe tractor seat, start engine. Afterthe engine is running, move throttle control to half (1/2) speed. With motion controllever'in neutral (N) position,slowly disengage clutch/brake pedal.

°Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five (5) feet return the motion controltever tothe neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

Your tractor is now purged and now ready for normal operation°

MOWING TIPS

°Tire chains cannot be used when the mower housing is attached to tractor,.

Mower should be properly leveled for'best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service arid Adjustments section of this manual

Use the runner on the right hand side of mower'as a guide_ The blade cuts approximately an inch outside the runner (See Fig. 8).

°The left hand side of mower should be used for trim- ming o

Ddve so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the tractor'. This will result in a more even distribution of clippings and more uniform cutting.

°When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig, 11),.

If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height..

Do not mow grass when it is wet. Wet grass will plug mower and Ieave undesirable clumps. Allow grass to dry before mowing.

Always operate eng.!he at full throttle when mowing to assure better mowing performance and proper'dis- charge of material. Regulate ground speed by select- ing a low enough gear to give the mower cutting performance as well as the quality of cut desired°

When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

F

FIG. 11

16

Page 16
Image 16
Sears 917.25049 owner manual Mowing Tips, Purge Transmission, Freewheel lever while the engine is run

917.25049 specifications

The Sears 917.25049 is a notable lawn tractor that has garnered attention for its reliability and performance in residential lawn care. Designed primarily for homeowners who require an efficient means of maintaining their lawns, this model combines user-friendly features with robust technology to deliver an exceptional mowing experience.

At the heart of the Sears 917.25049 is its powerful engine, typically a 17.5-horsepower Briggs & Stratton overhead valve engine. This engine is known for its durability and efficiency, enabling the tractor to handle various terrains with ease. The consistent power output allows for optimal performance, making it suitable for mowing various grass types and tackling uneven landscapes.

One of the standout features of the Sears 917.25049 is its 42-inch cutting deck. This is an ideal size for residential properties, striking a balance between maneuverability and cutting efficiency. The deck design allows for side discharging, bagging, or mulching, providing users with multiple options for handling grass clippings based on their preferences and lawn care strategies.

The mower deck is equipped with adjustable cutting heights, offering several options between one and four inches. This adaptability enables homeowners to customize their mowing height based on seasonal needs, ensuring a healthy lawn throughout the year. The easy-to-use lever for adjusting the cutting height makes this process quick and convenient.

In terms of technology, the Sears 917.25049 features a hydrostatic transmission system. This technology allows for smooth acceleration and provides seamless changes in speed without the need for clutching. Users can enjoy a more intuitive driving experience, particularly when navigating tight spaces or turning corners.

The tractor also has a comfortable operator station, equipped with a spacious and well-padded seat that ensures comfort during extended mowing sessions. The steering system is designed for ease of handling, allowing for quick and responsive turning capabilities. Safety features include an operator presence control, which ensures the mower engine shuts off if the operator leaves the seat unexpectedly.

In conclusion, the Sears 917.25049 lawn tractor is an excellent choice for homeowners seeking a robust and reliable machine for lawn care. With its powerful engine, versatile cutting deck, user-friendly design, and advanced technologies, it stands out as a dependable tool for maintaining a beautiful lawn throughout the seasons.