ASSEMBLY
TO ASSEMBLE AND ATTACH GRASS
CATCHER (See Figs. 3A thru 4C )
To assemble tubular frame to grass bag, work sewn hem of bag out through the front opening of beg to expose the hem.
Thread tubular frame into hem and gather material at top of frame as shown.
Push frame inside bag through the opening until only the ends of frame are exposed out of the front.
NOTE: Do not close the flip lid at this time.
•Assemble lower frame to tubular frame as shown. Be su re frames are fully seated together as shown in inset.
Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes, if bag gets wet, let it dr'/before using.
Ciose the flip lid. Flip lid must be closed while operating
lawn mower.
Lift the rear door on the rnower housing and place the grass catcher frame onto the formed tabs on the rear
door hinge bracket.
The grass catcher is secured to the lawn mower
housing when the rear door is lowered onto the grass catcher frame.
=_ | CAUTION: | Do not run your | lawn mower |
_ _, | w_ | deflector | or approved |
! _ | t_Kawnmowerwiththerear |
| |
| door removed or propped open. | ||
|
|
| CATCHER FRAME |
|
|
| FLiP LID |
|
|
| \ |
SEWN | i |
|
|
HEM | \ |
|
|
(Pullout |
|
|
|
through front of opening}
TUBULAR
FRAME
(Push inside bag)
FroG.30
LOWER
/" FRAME
FRAME
TUBULAR
(Frames must / be fully seated}
FIG. 4A
FIG. 3A | FIG. 4B |
|
DOOR
SEWNHINGE
HEM
BRACKET
GRASSCATCHERFRAME
TUBULAR |
| |
FRAME | FORMED | |
_hreadinto | ||
TABS | ||
sewn hem) |
| |
FIG. 38 |
| |
7 | FIG. 4C |