Sears 950 operating instructions Specifications, REPLACEMENT PARTS/accessories

Models: 950

1 13

Page 13

12.	SPECIFICATIONS
Internal Battery Type		DieHard Maintenance-free AGM Lead-acid
Nominal Voltage		12V DC
Capacity		18 Ah
DC Power Outlet (Max. Continuous Load)		15A (both outlets combined)
Built-in Light Bulb (Replaceable)		Two, 5w/12v Dc (Base type BA9S)
Jumper Cables		4-gauge awg, 24 Inches
Dimensions (H x W x D)		12 H x 11 x 10.5 Inches
Product Weight		18.9 Lbs.
13.	REPLACEMENT PARTS/accessories
	Male-to-Male Accessory 12V Charging Connector -----------------------		94500109

• 10 •

Image 13

Contents

Read and follow all Safety Portable PowerOPERATOR’S MANUAL Model NoPage BATTERY. MUST BE DISPOSED OF PROPERLY Table of ContentsDieHard ONE-Year Full Warranty SectionPage RISK OF EXPLOSIVE GASES RISK OF ELECTRIC SHOCK OR FIREPage A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE 3. FOLLOW THESE STEPS WHEN connecting to a BATTERYRISK OF A SPARK NEAR THE BATTERY NEGATIVE GROUNDED SYSTEM5. ASSEMBLY INSTRUCTIONS 4. Grounding and AC power cord connections6. FEATURES 1. Jump Start On/Off Switch 2. Digital Display 3. Work Light7.2 Charging the Internal Battery using the Included Wall Charger 7. Charging the internal battery of the Jump starter8. OPERATING INSTRUCTIONS 8.1 Digital Display Functions 8.2 Jump Starting a Vehicle EngineRisk of Explosion 8.3 Powering a 12V DC DeviceAppliance Type Estimated Wattage8.5 Using the Built-In Light 8.4 Using the USB Port9. MAINTENANCE INSTRUCTIONS 10. Moving and STORAGE INSTRUCTIONSPROBLEM 11. TROUBLESHOOTINGREASON/SOLUTION 10.5 IMPORTANT CHARGE IMMEDIATELY AFTER PURCHASE KEEP FULLY CHARGEDREPLACEMENT PARTS/accessories SPECIFICATIONS