Maintenance and Service

Maintenance and Service

Maintenance and Service

TURN THE AIR CONDITIONER OFF AND REMOVE THE PLUG FROM THE POWER OUTLET.

AirFilterCleaningHowtoAttachFrontGrilletoCabinetManual backgroundAirManual backgroundFilterManual backgroundManual backgroundCleaningManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

The air filter should be checked at least twice a month to see if cleaning is necessary. Trapped particles in the filter will build up and block the airflow. This reduces the cooling capacity and also causes an accumulation of frost on the cooling coils.

If the filter becomes turn or damaged you should replace immediately. Replacement filters are available from your salesperson, dealer, and the authorized customer service centers.

1. Open the inlet grille downward by pulling out the top of the inlet grille.

2. Remove the air filter from the front grille assembly by pulling the air filter up slightly.

3. Wash the filter using lukewarm water below 40°C (104°F).

4. Gently shake the excess water from the filter completely. Replace the filter.

ENGLISH

Manual backgroundManual backgroundManual backgroundHowManual backgroundtoManual backgroundAttachManual backgroundFrontManual backgroundManual backgroundGrilleManual backgroundManual backgroundtoManual backgroundManual backgroundCabinetManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

The front grille can be removed for cleaning or to check the model and serial numbers. For your safety, you should attach the front grille as the following procedures.

1.Pull down front grille from the cabinet top.

2.Push front grille’s tips toward the cabinet in order to insert front grille’s tabs into the cabinet.

3.Open the inlet grille.

4.Tighten the screw through the front grille into the plate of control box.

5.Close inlet grille.

Owner’s Manual 21

Page 21
Image 21
Sears LT123CNR manual Maintenance and Service, AirFilterCleaning, HowtoAttachFrontGrilletoCabinet, English, Owner’s Manual