17 15
14 | 18 | 16 |
| ||
|
|
18
19
20
21
24
22
25
23
The SEBO air belt
Your SEBO cylinder vacuum cleaner has a unique soft bumper
(14)which protects your walls and furniture. The microfiltered exhaust air is dissipated round the air belt.
The air belt can easily be changed. Take the clip (16) off and remove the textile cover (15). The foam part (17) stays on the machine.
To fit the new air belt, slot the side rails into the grooves (18). Start at the back and proceed round the machine. Secure the ends with the clip (16).
Never operate the machine without an air belt (15).
Using the machine
Before connecting the plug, pull the cable (19) fully out. The cable rewind is operatded by the rewind button (20). Before rewinding the cable always switch off and unplug the machine. The main switch (21) turns the machine on, indicated by the green light (22). The machine can be switched to standby mode with the power adjustment slider (23). The green light will stay on until the machine is switched off at the main switch (21). The standby mode is for short interruptions. For longer interruptions, always turn off at the main switch and unplug.
For optimal carpet cleaning the machine can be used with power brush. The plug contacts to the socket (24) and fits to the neck of the hose.
Suitable for SEBO power brushes only.
Bag light (orange)
The orange bag light (25) indicates a full bag or blockage in the hose or tube. The light only works correctly at full power, at lower, power levels the bag light might indicate incorrectly. Check status regularly at full power.
SEBO ET-H Power Head (optional attachment)
The