|
|
| Identification of Parts | ||
| 1. Handle grip |
| 12. Attachment hose | ||
| 2. | On/Off switch | 13. | Handle catch | |
| 3. Handle assembly | 14. Carrying handle | |||
| 4. | Retaining ring | 15. | Cable (cord) hook | |
| 5. | Cover release flap | 16. | Attachment tube (active wand) | |
| 6. | Dust bag housing | 17. | Crevice nozzle | |
| 7. | Front cover |
| 18. | Upholstery nozzle |
| 8. | Housing release button | 19. | Foot pedal | |
| 9. Power head with brush | 20. Swivel neck | |||
| 10. Cable (cord) | 21. | Support lever | ||
| 11. Attachment tube handle | 22. | Projection tab | ||
|
|
|
| 23. Connecting tube | |
| 41 | 42 | Optional Attachments | ||
| 41. Wall and floor brush - Part # 1325 HG | ||||
|
|
|
| ||
| 46 |
| 42. Turbo brush for stairs - Part # 6179 AM | ||
|
| 43. Radiator brush - Part # 1496 HG | |||
|
| 43 | 44. Extension hose (9’3”) - Part # 1495 AM | ||
|
|
|
| ||
|
| 45 |
| 45. Straight tube - Part # 1084 HG | |
| 44 |
| 46. Flat upholstery nozzle - Part # 1090 HG | ||
|
| Also available for odor control - the combined | |||
|
|
|
| ||
24 | Standard Attachments | micro/charcoal filter - Part # 5425 AM | |||
|
| ||||
17.Crevice nozzle
18.Upholstery nozzle
|
|
|
| 25 |
| 24. Dusting brush clamp |
|
| |||||
18 | 17 |
|
|
| Assembly | ||||||||
|
|
| 25. Dusting brush |
| |||||||||
|
|
|
|
| |||||||||
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Place the power head (9) on the floor with |
|
|
|
|
|
| 25 |
|
|
| ||||
|
|
|
|
|
|
|
|
| the swivel neck (20) and the support lever | ||||
|
|
|
|
|
|
|
|
|
|
|
|
| (21) upright. Hold the dust bag housing (6) |
|
|
|
|
|
|
|
|
|
|
|
|
| vertically and place it over the swivel neck |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| and support lever. Push firmly and evenly |
|
|
|
|
|
|
|
|
|
|
|
|
| down so that the housing release button (8) |
|
|
|
|
|
|
|
|
|
|
|
|
| snaps outward to its “locked” position. |
|
|
|
|
|
|
|
|
|
|
| Attach dusting | ||
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| brush clamp |
| Slide the dusting brush clamp (24) onto the |
|
|
|
|
|
|
|
|
|
|
| with screw |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| handle tube and tighten the screw. The han- |
|
|
|
|
|
|
|
|
|
|
|
|
| dle of the dusting brush (25) will now snap |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| into the clamp. |
24
Note
All illustrations shown in this manual represent the X4 model except where part numbers and instructions are different for each model. In those instances, illustra- tions for both the X4 and X5 will be shown.
To lock the handle (3) to the dust bag hous- ing (6), turn the handle catch (13) at the handle joint of the filter bag housing (6) for- ward to “open” position. Then slide the han- dle assembly (3) in as far as possible and lock it in by turning the handle catch to the closed position.
Push the black end of the attachment hose
(12)into the connecting tube (23) so that it clicks into place. Insert the attachment tube
(16)into the swivel neck and push the han- dle (11) over the projection tab (22).
Insert crevice nozzle (17) and upholstery nozzle (18) into the recesses in the back of the machine.
Page 5
