SECO-LARM USA EVT-PH16-4T2 dimensions Enforcer, Video, Port Passive Transceiver Hub, Features

ENFORCER®

VIDEO

16-Port Passive

Transceiver Hub

EVT-PH16-4T2

Range: Up to 2,000’ (6100m) Video ✁ Data ✁ Surge Protection

The EVT-PH16-4T2 allows up to 16 color or monochrome CCTV	Typical Installations:
cameras to be connected via inexpensive CAT 5e unshielded	Data
twisted pair (UTP) cable to a video switcher or multiplexer. It cuts
	Video
the cost and complexity of security networks by eliminating the

need to run expensive coax cable to multiple CCTV cameras. A built-in RS485 port allows the transmission of PTZ (pan/tilt/zoom) signals to up to 16 CCTV cameras or other devices.

Video Out

{

Features:	Data
Connects up to 16 CCTV cameras using
	In
low-cost CAT 5e UTP cable to a central location.

Works in conjunction with passive video or active video baluns.

Works with full-motion CCTV cameras up to 2,000 feet (610 meters) away via passive video baluns.

Feeds the camera signals to nearly any standard video multiplexer or switcher or digital video recorder via coax cables.

Built-in RS485 port connects to a PC or other device to control the pan, tilt, and zoom (PTZ) of up to 16 remote cameras or devices.

Compact enclosure, only 1U (1.75 inches) high. Mounts in a standard 19-inch rack.

Built-in transient protection and interference technology for existing UTP cables.

Complete passive operation, no power required.

{ Video in / data

Monitor

Specifications:

Dimensions:

Video input ports

Video input cables

Video output ports

Video output cables

Data input

Data output

Power

Surge protection

Size

Weight

Material

16 x 2-wire ports on removable terminal blocks

Unshielded twisted pair (UTP), min. CAT 2. Use CAT 5e or better for best range and video signal.

16x BNC connectors, each 1Vp-p, 75 ohms. Coax.

1 x 2-wire port, for PTZ control signals from a PC.

16x 2-wire ports on removable terminal blocks. No power required.

Video and data

1U form factor, 17.25” x 6.75” x 1.75” (482 x 170 x 44 mm) 4.9 lb. (2.2kg)

Steel cabinet, black matte finish.

17.25” x 6.75” x 1.75” (482 x 170 x 44 mm)

Balunse.pmd The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

SECO-LARM®U.S.A., Inc.,	16842 Millikan Avenue, Irvine, CA 92606		Tel: 1-800-662-0800 (Domestic U.S. & Canada)
Tel: 1-949-261-2999 (California & International)	Fax: 1-949-261-7326	Email: info@seco-larm.com		Website: www.seco-larm.com