Seiko 7B26 manual Checking the Charging Status by the Movement, Second Hand

CHECKING THE CHARGING STATUS BY THE MOVEMENT OF

English	THE SECOND HAND
	The second hand moves	The watch is	No need to charge
	at one-second intervals.	sufficiently charged.	the watch yet.

ENERGY DEPLETION FOREWARNING FUNCTION

English

The second hand moves at two-second intervals

The second hand moves at five-second intervals.

The second hand is stopped.

The energy depletion forewarning function is activated.

The power save

function is activated.

The watch completely

stops operating.

Refer to “ENERGY

DEPLETION FOREWARNING

FUNCTION” on page 13

to charge the watch sufficiently.

Refer to “POWER SAVE FUNCTION” on pages 14-15. *1

Energy having been stored in the watch has been consumed due to reasons such as leaving the watch in a dark place for a long time. After charging the watch sufficiently, conduct manual

reception to set the time. *2

The energy depletion forewarning function is activated when the energy stored in the watch runs low. In such a case, the second hand moves at two-second intervals. If the watch continues to be in the state of two-second interval movement, the watch switches to five-second interval movement, followed by a completely stopped state.

If the energy depletion forewarning function is activated, charge the watch sufficiently. HOW TO CHARGE THE WATCH…page 10

STANDARD CHARGING TIME…page 11

*Neither the buttons nor the crown can be operated while the second hand moves at two-second or five- second intervals (this is not a malfunction).

*While the second hand moves at five-second intervals, the hour and minute hands and calendar stop operating.

*While the second hand moves at five-second intervals, the watch is unable to receive radio signals automatically. After the watch is charged sufficiently and the second hand returns to normal one-second interval movement, conduct the manual reception of radio signals to set the watch to the correct time. After

*1. If the second hand is stopped even after the watch is sufficiently charged, refer to "TROUBLESHOOTING" on pages 64-65. *2. After the watch receives a radio signal, when the date is incorrect even if the correct time is displayed, check that the calendar is set to the preliminary position (refer to “PRELIMINARY POSITION CHECKING

12AND SETTING FOR THE CALENDAR” on pages 58-59).

completing the radio signal reception, when the date is incorrect even if the correct time is displayed, check that the calendar is set to the preliminary position (refer to “RADIO SIGNAL RECEPTION” on page 20 and “PRELIMINARY POSITION CHECKING AND SETTING FOR THE CALENDAR” on pages 58-59).

13