Seiko H601, H801 manual Analogue Time Setting

4.Press “B” to show the TIME/CALENDAR SETTING display. To return to the CALENDAR display, press “A”.

*If the watch is left untouched with digits flashing, the display will automatically return to the CALENDAR display after 1 to 2 minutes.

Notes: 1. When the flashing SECONDS digits read any number from “30” to “59” and “A” is pressed, one minute is added.

2.When setting the HOUR, check that AM/PM is set properly in the 12-hour indication. Only “P” (PM) is displayed. For the AM setting, there is no indication.

3.When the digital time is set in the 24-hour indication, the alarm time will also be displayed in the 24-hour indication.

ANALOGUE TIME SETTING

•Before setting the analogue time, be sure to set the digital time.

1.Pull out the crown when the second hand is at the 12 o’clock

position.* The second hand stops on the spot.

* If the crown is of the screw lock type, unscrew the crown by turning it counterclockwise, and then pull it out.

2.Turn the crown to set the desired hour and minutes. When setting the minute hand, advance it a few minutes ahead and then turn it back to the exact time.

Crown 3. Push the crown back in to the normal position in accordance with a time signal.*

*If the crown is of the screw lock type, screw it in completely by turning it clockwise while pressing it.