Screen Options

■Messages

Settings > Display > Messages

Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes).

■Startup Screen

Settings > Display > Startup Screen

Turn this setting off if you want to prevent the startup screen from appearing while the projector is warming up.

■Display Background

Settings > Display > Display Background

Changes the screen that’s used when the projector is not receiving a signal or when you press the Blank button to temporarily stop projection.

Other Setup Options

■Projection

Settings > Projection

You can select different options for projecting the image: Front, Front/Ceiling, Rear, Rear/Ceiling.

■Direct Power On

Settings > Direct Power On

Sets projection to start when the main power switch is turned on, without pressing the

Ppower button on the remote control or the projector.

Note: When direct power on is enabled, power surges that occur after a power outage can cause the projector to turn on.

■Video Signal

Settings > Input Signal > Video Signal

Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats).

46 Making Detailed Adjustments