TIME/CALENDAR SETTING
• Models with day and date | Day |
English
• Models with two/three hands
Hour hand
Second hand
1. Pull out the crown to the first click and set | Date |
the previous day and date. |
English
1. Pull out the crown to the first click.
2. Turn the crown to set the desired time.
3. Push bac k the crown comple tely ( in accordance with a time signal for a three- hand model.)
• Models with date
1.Pull out the crown to the first click and set the previous date.
2.Pull out the crown to the second click
when the second hand is at the 12 o'clock position.
3. Turn the crown until the desired date appears.
4. Turn the crown to set the hour and minute hands to the desired time.
5.P u s h b a c k t h e c r o w n c o m p l e t e l y i n accordance with a time signal.
Minute hand
Date
2. Pull out the crown to the second click when the second hand is at the 12 o'clock position.
3. Turn the crown until the desired day and date appears.
4.Turn the crown to set the hour and minute hands to the desired time.
5.P u s h b a c k t h e c r o w n c o m p l e t e l y i n accordance with a time signal.
NOTES:
1. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, it may not change properly.
•If it is necessary to set the date during that time period, first change the time to any time outside it, set the date and then reset the correct time.
2.When setting the hour hand, check that AM/PM is correctly set.
•The watch is so designed that the date changes once in 24 hours. Turn the hands past the 12 o’clock marker to determine whether the watch is set for the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If the date does not change, the time is set for the P.M. period.
3.When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.
4.It is necessary to adjust the date at the end of February and
8 | 9 |
