Seiko Instruments LTP F Series manual 81

9.1.4Considerations for Using

(1)Do not back feed paper after cutting paper using the autocutter unit because it will cause a paper jam.

(2)To prevent paper from jamming, feed paper or print feed 7 mm or more after cutting paper.

(3)To make the most efficient use of paper, as shown in Figure 9-7, print area A for the next print portion after printing area B, and then cut the paper.

		Paper feed direction
			Execute a paper cutting after printing
	PRINTAREA A
				PRINT AREA B		and the next
				PRINT AREA A	.
	B
	PRINT AREA B
One-time
printing
area				Cut position
				Cut position
	A
	PRINT AREA A			Print startPrint positionstart position.
	PRINT

‘The distance between the print position and cut position when mounting the autocutter onto the printer is approximately 13 mm.

‘Do not perform a consecutive print across print area A and print area B.

Figure 9-7 Using the Paper Effectively When Cutting

9-7