9.1.2Clearing a Paper Jam in the Autocutter

Owing to the paper jammed, if the cutter has been locked during paper cutting, power off the motor immediately and cancel the lock by performing the following procedures manually.

(1)Tear transparent film from the upper surface of the autocutter (Figure 9-4 (1)), turn the knob in the direction shown in Figure 9-4 (2) until the entire hole of the warm wheel can be seen from the standby position confirmation window and retreat the movable blade. (Figure 9-4 (2))

 

 

Knob

 

Knob

Transparent film

 

 

 

 

 

 

 

 

 

 

 

 

 

Standby position confirmation window

Figure 9-4 Clearing a Paper Jam in the Autocutter

Open the platen after retreating the movable blade with the above way, and then clear a paper jam.

9-4