Fixing Blade Unit

(1)Remove the protection tape that is attached to the fixing blade unit as shown in Figure 9-2.Handle with care the fixing blade edge after removing the protection tape.

(2)Mount the fixing blade unit to the autocutter unit with 2 screws.

Recommended screws: JIS 1188 pan head machine screw (small round type) M2⋅4. Be careful not to damage the platen during installation.

Protection tape

Figure 9-2 Fixing Blade Unit

Positioning hole

Screws

Figure 9-3 Installing Autocutter Unit (Fixing blade unit)

9-3