FinishPro®25XP
XtremePro™ 18 Gauge Brad Nailer
Adjustable Exhaust –
No tools required
Overmold Grip –
Reduces vibration and fatigue, increases productivity
Angled Air Inlet
Keeps the hose off the work surface when the tool is in the vertical position
NeverLube® Technology – Requires no tool oil
Lightweight & Maneuverable – At only 2.7 lbs, for easy maneuvering and light enough for all day work
Overmold Trigger – Reduces fatigue
Belt Hook Lets the tool go where you go
Thumb Wheel Adjustable
Construction Ruler –
For quick measurements
Protects work surface and the square nose safety design keeps the tool from slipping out of position
Last Brad Lock Out – Lengthens the life of the tool
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in the following a sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in the following sequence- pull the trigger first and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure proper use and safety precautions. For additional information on trigger systems and how SENCO will save you time, reduce costs, and increase quality, call our
©2007 Senco Products, Inc. | www.senco.com | ® |
|
