Senco PC1005 Hazard Potential Consequence Prevention Risk, Explosion or Fire, Bursting

Models: PC1005

1 16
Download 16 pages 11.52 Kb
Page 5
Image 5

SAFETY WARNINGS

READ ALL SAFETY WARNINGS BEFORE USING AIR COMPRESSOR

 

HAZARD

 

POTENTIAL CONSEQUENCE

PREVENTION

 

 

 

 

 

 

RISK OF

 

Serious injury or death may occur from

Always operate air compressor in a

 

EXPLOSION OR FIRE

 

normal electrical sparks in motor and

well ventilated area free of

 

 

 

pressure switch.

 

flammable vapors, combustible

 

 

 

 

 

 

 

 

dust, gases or other combustible

 

 

 

 

 

materials.

 

 

 

 

 

If spraying flammable material,

 

 

 

 

 

locate the air compressor at least

 

 

 

 

 

20 feet away from the spray area.

 

 

 

 

 

(An additional hose may be

 

 

 

 

 

required.)

 

 

 

Serious injury may occur if any air

Never place objects against or on

 

 

 

 

 

 

 

 

 

compressor ventilation openings are

top of air compressor. Operate air

 

 

 

restricted, causing the air compressor

compressor at least 12 inches away

 

 

 

to overheat and start on fire.

from any wall or obstruction that

 

 

 

 

 

would restrict proper ventilation.

 

 

 

 

 

 

 

 

 

 

 

RISK OF

 

Serious injury or death may occur from

Drain air tank daily or after each use

 

BURSTING

 

an air tank explosion if air tanks are

to prevent moisture buildup in the

 

 

 

not properly maintained.

air tank.

 

 

 

 

 

If air tank develops a leak, replace

 

 

 

 

 

the air tank immediately. Never

 

 

 

 

 

repair, weld or make modifications

 

 

 

 

 

to the air tank or its attachments.

 

 

 

 

 

Use only genuine SENCO® repair

 

 

 

 

 

parts for your air compressor.

 

 

 

 

 

Never make adjustments to the

 

 

 

 

 

factory set pressures.

 

 

 

Serious injury may occur from an air

Never exceed manufacturers

 

 

 

compressor malfunction or exploding

maximum allowable pressure rating

 

 

 

accessories if

incorrect system

of attachments.

 

 

 

components,

attachments or

Because of extreme heat, do not

 

 

 

accessories are used.

 

 

 

 

 

use plastic pipe or lead tin soldered

 

 

 

 

 

joints for a discharge line.

 

 

 

 

 

Never use air compressor to inflate

 

 

 

 

 

small, low pressure objects such as

 

 

 

 

 

toys.

 

 

 

 

 

 

5

Page 5
Image 5
Senco PC1005 operating instructions Hazard Potential Consequence Prevention Risk, Explosion or Fire, Bursting