SLS15Mg
18 Gauge Magnesium Stapler
Magnesium | Selectable |
| ||
Alloy Housing | Trigger* | Rubber Grip | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oil-less
Engine
Reload
Indicator
Rear Exhaust w/ 360° Rotation
Swivel Plug
Swiveling
Belt hook
Adjustable |
|
| |
Composite Magazine | |||
Depth of Drive | |||
|
| ||
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger re) operates in the following a sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool o the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications.
Contact Actuation (also known as dual action, bounce or bottom re) operates in the following sequence- pull the trigger rst and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tool to ensure proper use and safety precautions. For additional information on trigger systems and how SENCO will save you time, reduce costs and increase quality, call our
www.senco.com | ©2008 by Senco Products, Inc. |
