®
Roofing and Medium-Duty Stapler SPS
Tool Specifications:
Tool Weight: 5.3 lbs.
Height: 9 7/ 8"
Length: 13 1/2"
Width: Main Body 3 1/32"
Staple Capacity: 140+
Mode of Operation: either bottom fire/trigger fire tools or trigger fire tools are available*
Operating Pressure Range:
Tool | Model | Fastener Range |
1 1/2" Roofer | 340005N | |
1 1/4" Industrial | 340002N | |
1 1/2" Industrial | 340004N |
Any of the SPS models above can be adapted to drive 1/2" through 3/4" P staples by ordering and installing P/N FAO 155. A modified magazine assembly is required to drive 1 3/4" and 2" staples.
Companion SENCO Tools:
The PW drives P08, P10, P11, P12, P13, and P15. The MW drives P11, P12, P13, P15, P17, and P19 (with modified magazine).
Tool Specifications:
Fastener Specifications:
P Series Staples
•Crown: 1" (25mm)
•Wire Size: 16 Gauge (1.6 mm)
| Inches | 3⁄4" |
| 7⁄8" | 1" | 11 ⁄4" | 11 ⁄2" |
Lengths | |||||||
| Millimeters | 19 |
| 22 | 25 | 32 | 38 |
| |||||||
Part No. | P11BAB |
| P12BAB | P13BAB | P15BAB | P17BAB | |
Staples/Box | 10/M |
| 10/M | 10/M | 10/M | 10/M | |
Boxes/Carton | 1 |
| 1 | 1 | 1 | 1 | |
|
NOTE: All part numbers shown are for galvanized carbon steel staples with chisel point and SencotePlus®.
* “Restrictive Trigger” activated tools are | firing. You must keep the trigger pulled |
used for applications where precision nail | while moving the tool along the work sur- |
or staple placement is desired. You must | face with a bouncing motion, depressing |
first depress the safety element where you | the safety element where you want to drive |
want to drive a nail or staple and then pull | a nail or staple. |
the trigger. After each nail or staple is driv- | Trigger Fire Method: First depress the |
en, completely release the trigger and lift | safety element where you want to drive a |
the tool off the work surface. | nail or staple and then pull the trigger. |
“Dual Action” activated tools are used | For instructions on safe use of tools with |
for applications where | either of these activating mechanisms, |
work is desired. There are two modes of | please refer to the Operating Instructions or |
operation: | Customer Satisfaction and Safety |
Bottom Fire Method: This method of | Reminder contained in your tool carton. |
operation is sometimes called bounce |
|
|
|
For additional information on how Senco fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized Senco Dealer or Distributor listed in the Yellow Pages under “Staples,” or call our
©1998 by Senco Products, Inc. Order MK313 (7.5AMP1098) Litho in U.S.A.
3/4 | 7/8 | 1 |
P11 | P12 | P13 |
11/411/2
P15P17
Safety First. The only way to work.®