Connecting an additional audio player
The 3.5 mm jack socket allows you to connect and listen to an additional audio player (e.g. MP3 player) through the headset.
DANGER! Danger of accident due to reduced attention!
Listening to music or operating an audio device limits your attention and may cause accidents.
During flight operation, do not use the headset for listening to additional audio sources!
Hearing damage due to high volumes!
This headset is capable of producing high sound pressure levels. Higher volumes or longer durations can damage your hearing!
Set the volume to a medium level. Make sure that you can hear critical sounds such as warning alarms.
Connect the audio cable to the 3.5 mm jack socket on the operating control and to the corresponding jack socket on your audio player.
Switch NoiseGard 2.0 on (see “Switching NoiseGard on/ off” on page 16).
Audio from the additional audio source and from the intercom are heard simultaneously through the headset.
Operate the connected audio player as usual and observe the manufacturers instructions.
11
