Using the Set
Adjusting the volume
Use the volume control 2 to adjust the volume to a sufficient and comfortable level.
Searching for a sound source
Put the receiver on.
The receiver automatically searches for one of the 3 channels of the transmitter and starts the channel search on the last selected channel. If a channel is found, the channel search stops.
Your hear the sound of the sound source found.
Depending on the channel found, the receiver produces
1, 2 or 3 beeps (see page 22) and the channel indicator 1 on the receiver lights up as follows:
The channel indicator 1goes off after 30 seconds so that the light won’t disturb you in a dark room.
14