Connecting the antenna

The AC 3000 active transmitter combiner can be used with either the A 2003 UHF directional antenna or the A 1031 U omni-directional antenna. The antenna transmits the signals of all connected transmitters. The signals are combined onto the antenna output with no distribution attenuation.

￿ Connect the antenna to the antenna output ANT .

Note:

Each AC 3000 requires its own antenna! Several AC 3000s cannot be daisy-chained!



Connecting the transmitters

You can connect up to eight SR 3054 transmitters or up to four SR 3056 twin transmitters to the AC 3000.

￿Use 50-Ohm BNC cables to connect the transmitters to the RF inputs RF IN 1 to RF IN 8 .

Connecting the mains cable

￿ Connect the mains cable to the IEC mains socket and to the mains.

8

Note:

The AC 3000 can be connected to any mains power supply with 100 V to 240 V AC (50 to 60 Hz).

6