Sennheiser EK 3241 manual Working with the operating menu, After switch-on

Working with the operating menu

By way of example of the “dISP” menu, this section describes how to use the receiver’s operating menu.

The operating menu has three modes:

yDisplay mode

In display mode, you can display the current menu settings one after the other – even when the lock mode is activated.

ySelection mode

In selection mode, you can select the menu whose setting you want to change. To change to the selection mode, the lock mode must be deactivated.

ySetting mode

In setting mode, you can change the setting of the selected menu.

Display mode Selection mode Setting mode

	SET	dISP	SET	FrEq		CHAn
Current		Selecting the		Current	:
standard display		standard display		setting		CHAn, FrEq, Bat.tr

StorEd

After switch-on

SET

After switch-on, the standard display is shown on the LC display panel. Depending on the setting, the receiving frequency, the channel number or the battery status of the corresponding transmitter is displayed.

Note:

In order that the transmitter battery status can be displayed on the “BAt.tr” standard display, this functionality must be supported by the transmitter used (see “Suitable transmitters” on page 4).

10