Models, Headphone socket, Connection | Sennheiser EKI 1029-12 03252

Models
Type: EKI 1029-7	03475	(7 channels, yellow volume control)
EKI 1029-12	03252	(12 channels, grey volume control)
EKI 1029 PLL-16	03627	(16 channels, blue volume control)
EKI 1029 PLL-32	04623	(32 channels, blue volume control)

Headphone socket

Socket serves to connect magnetic or dynamic mono headphones. For suitable headphones please see "ACCESSORIES".

Socket: 3.5 mm for mono jack plug, max. output voltage: 0.9 Vrms / 200 Ω .

Attachment
Use the clip at the rear of the unit to attach the receiver to your clothing. Make sure that diode	is not
covered. It is also possible to lay the receiver on a table (with the diode up).

The receiver is switched on automatically after the headphone has been plugged into socket . Select a

channel using switch

(EKI 1029 PLL-32:

+ ). Adjust the volume with volume control .

The portable charging unit L 1029-75 serves to recharge the batteries after the receiver has been used.

Accessories (to be ordered separately)
HD 410 D	(Art. No. 02146)	open-type headphone with silicone earpads
HD 1019	(Art. No. 03985)	open-type headphone with foam earpads
TC 2-26	(Art. No. 05115)	lightweight stethoscopic headphone
TC 2-36	(Art. No. 05116)	stethoscopic headphone with foam earpads
L 1029-75	(Art. No. 03371)	charging unit and system case (230 V)
L 1029-75 UK	(Art. No. 03543)	charging unit and system case (UK)
L 1029-75 120	(Art. No. 03544)	charging unit and system case (120 V)
Technical Data
Modulation		FM
Carrier frequencies		55 - 1335 kHz
Frequency range		50 - 8,000 Hz
Terminating impedance		25 Ω - 2000 Ω
Headphone socket		3.5 mm, mono, automatic on/off function
Power supply		rechargeable batteries; 2.5 V / 170 mAh
Operating time		approx. 30 hrs
S / N ratio		> 52 dB(A)
Weight		approx. 100 g

Subject to alterations.