Sennheiser HDA 280 manual Cleaning the headphones, Available accessories and spare parts

Cleaning the headphones

To clean the headphones, use a soft, damp cloth. If necessary, the headphones can be cleaned with a cloth that has been dipped in soapy water (use a mild cleanser such as washing-up liquid).

Note!

Do not immerse the headphones in water or allow the capsules to become wet.

Never use solvent-containing cleansers.

Available accessories and spare parts

yEar cushions

yHeadband padding

yConnecting cable

Replacing the ear cushions

￿ Grasp behind the ear cushions and pull them up and away from the earcups. ￿ Slide the new ear cushions onto the earcups.

Replacing the headband padding

￿ Pull the Ziploc type fastening strips of the headband padding apart, as shown in the diagram on the left, and remove the worn headband padding.

￿ Put the new headband padding around the headband.

￿ Pull the two edges of the headband padding together so that the fastening strips slightly overlap.

	￿ Join the fastening strips.
	Replacing the connecting cable
￿	￿ Remove the ear cushion. Grasp behind the ear cushion and pull it up and away from the earcup.
	￿ Loosen the screw ￿ and remove it.
	￿ Remove the cover from the earcup ￿.
	￿ Pull the connector ￿ out of the socket.
	￿ Remove the strain relief of the connecting cable from the holding device ￿.
￿	￿ Insert the strain relief of the new connecting cable into the holding device.

￿Plug the connector ￿of the new connecting cable into the socket as shown in the diagram on

￿the left.

￿Put the cover back onto the earcup ￿.

￿ Replace the screw ￿ and tighten it. ￿ Slide the ear cushion onto the earcup.

￿
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany	Telefon +49 (5130) 600-0	Printed in Germany
www.sennheiser.com	Telefax +49 (5130) 600-300	92106 Publ. 06/03