Cleaning and maintaining the HDVA 600

Cleaning and maintaining the HDVA 600

CAUTION

Liquids can damage the electronics of the product!

Liquids entering the housing of the device can cause a short circuit and damage the electronics.

￿Keep all liquids far away from the product.

￿Do not use any cleansing agents or solvents.

￿Disconnect the product from the mains before cleaning.

￿Only use a dry and soft cloth to clean the product.

If a problem occurs ...

Problem

Possible cause

Solution

Page

 

 

 

 

RCA input:

The sensitivity is

Adjust the signal of the

13

signal distorted

adjusted too high or

analog audio source.

 

or too low

too low

 

 

 

 

 

 

Analog

The audio signal is

Adjust the audio signal

 

XLR-3 input:

adjusted too high or

directly at the audio

-

signal distorted

too low at the audio

source.

 

or too low

source

 

 

 

 

 

 

If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance.

To find a Sennheiser partner in your country, search at www.sennheiser.com > “Service & Support”.

HDVA 600 14