1 | s |
|
s |
| s |
s |
|
|
| v | v |
2 |
|
|
3 |
|
|
m | m |
|
|
|
Connecting to form larger systems
If several systems are to be operated simultaneously, it is recommended that the corresponding charging units be connected in series.
To do this the screws (S) are unscrewed from the base, the connecting rails (V) are removed and then resecured with the screws so that the units are permanently connected to each other. The power supply flows from one charger to the next via the connecting rails (V).
One Power Supply Unit NT 2013 is sufficient for 5 Dual Charging Units L 2013.
Wall mounting
The charger is prepared for wall mounting. The correct slots (M) are located on the back side.
