![](/images/new-backgrounds/1302070/30207017x1.webp)
Putting the charger into operation
Putting the charger into operation
NOTICE! Danger due to heat accumulation!
The charger and the receiver rechargeable batteries can get very hot during charging. If the heat cannot dissipate, the devices can be damaged.
Make sure that the air vents of the charger are not covered or blocked.
Make sure that the ambient temperature of the charger does not exceed 40°C. If necessary, provide additional ventilation.
Keep the charger away from heat sources and never expose it to direct sunlight.
The charger can be:
•placed on a table or cabinet
•installed in a 19” rack
•installed in a cabinet or similar
When using the “Conference Control” software, it automatically sorts its charger displays according to ascending serial numbers. The assignment of the charger displays of the software to the chargers becomes easier and clearer if you install the chargers according to ascending serial numbers.
Placing the charger on a table or cabinet
The charger has four plastic feet to ensure that it cannot slip on the surface on which it is placed.
NOTICE! Risk of staining of furniture surfaces!
Some furniture surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining.
Do not place the charger on delicate surfaces.
Place the charger on a table, cabinet or similar.
7