Sennheiser ME 104, ME105 dimensions ME 102/104/105 System, Modular Mini-Microphone System

ME 102/104/105 System

Microphones Back-Electret Condenser Microphone	Cat. No. 005276
Modular Mini-Microphone System

General Description

The ME 102/104/105 modular mini-microphone system fulfils profes- sional demands for sound quality and rugged handling, and is suitable for all areas of live work where a small and unobtrusive microphone is needed for vocal and speech applications. Scratch-resistant matt finish: anthracite or nickel.

ME 102 ME 104 ME 105

Modules available for the ME 102/104/105 system	Cat. No.
Microphone capsules including windshields
(available in anthracite / nickel)
ME 102 (+ MZW 102)	003876 / 003838
ME 104 (+ MZW 104)	004227 / 004228
ME 105 (+ MZW 104)	005301 / 005302
￿Copper wire cables (available in anthracite / grey)	004233 / 004234
KA 100-4
KA 100-1083	004399 / 004401
KA 100-60	004237 / 004238
KA 100-P	004241 / 004242
￿KA 100-5	004245 / 004246
KA 100-2R	004229 / 004230
Steel wire cables (available in anthracite / beige)
KA 100 S-4	004235 / 004236
KA 100 S-1083	004402 / 004403
KA 100 S-60	004239 / 004240
KA 100 S-P	004243 / 004244
￿KA 100 S-5	004247 / 004248
KA 100 S-2R	004231 / 004232
MZ 100 accessory set	004226
consisting of: 2 MZQ 102 (anthracite and grey)
2 MZQ 02 (anthracite and nickel)
2 ZH 100 (anthracite and beige)
1 carrying case
￿MZM 2 / MZM 10 magnetic mount set	001866
￿

Technical Data ME 102/ME 104/ME 105

Pick-up pattern
ME 102	omni-directional
ME 104	cardioid
ME 105	super-cardioid
Frequency response
ME 102	40 – 20,000 Hz ± 3dB
ME 104/ME 105	100 – 20,000 Hz ± 3dB
Sensitivity (free field, no load) (1 kHz)
ME 102	10 mV/Pa ± 2.5 dB
ME 104	8 mV/Pa ± 2.5 dB
ME 105	1.6 mV/Pa ± 2.5 dB
Nominal impedance
ME 102/ME 104	1 kΩ
ME 105	800 Ω
Min. terminating impedance	4.7 kΩ
Equivalent noise level ME 102
A-weighted (DIN IEC 651)	21 dB
CCIR-weighted (CCIR 468-3)	33 dB
Equivalent noise level ME 104
A-weighted (DIN IEC 651)	30 dB
CCIR-weighted (CCIR 468-3)	38 dB
Equivalent noise level ME 105
A-weighted (DIN IEC 651)	31 dB
CCIR-weighted (CCIR 468-3)	41 dB
Max. SPL (1 kHz)
ME 102	127 dB (THD = 1 %)
ME 104/ME 105	133 dB (THD = 1 %)
Supply current	approx. 250 µA
Dimensions	Ø 6 x 12 mm
Weight (without cable)	1 g
Frequency response ME 102

Frequency response ME 104/ME 105