MZG 415-3

MZB415

~

,

tQL

M~

XLR-3-11 C

XLR-3-12 C

~l- - ~ ~ - - - --- -- - -- - - - -- ~ ~ - - J

XLR-3-11 C

T 3260001

Gelenkarm MZG 415-3

(Art.-Nr. 1955)

In Verbindung mit der Feder-

halterung MZS 415-3 dient der Gelenkarm zur Befesti-

gung von Mikrofonen auf Sta- tiven und Tischfüßen. Durch

ausschraubbaren Gewin- deeinsatz passend für %", %"

oder Y2"-Gewinde. Gelenk um 1800 schwenkbar.

Farbe: schwarz.

Mikrofonangel MZB 415

(Art.-Nr. 0972) Zweiteilige Glasfiber- Mikrofonangel. Mikrofonbefe- stigung mit einstellbarem Nei- gungswlnkel und %"- Gewinde. Aufnahmerichtung

durch Drehen des Angelsta- bes um 3600 zu verändern.

Länge:

min.

120

cm

Gewicht

max.

340

cm

ca. 640

9

 

Tischfuß MZT 100

(Art.-Nr. 1883)

Stabiler, weich umschäumter Tischfuß mit hoher Standfe- stigkeit und guter Körper- schalidämpfung. Befesti- gungsschraube %".

Tischfuß MZT 441

(Art.-Nr.0799)

Stabiler, standfester Tischfuß aus Metall, mit %"-Befesti- gungsschraube.

Farbe: grau.

Passend für MZG 415-3.

Anschlußkabel KA 7 U

(Art.-Nr.1777)

Kabel zum Anschluß von

Mikrofonen mit 3pol. XLR-3- Stecker, System Cannon, an symmetrische Mikrofonein- gänge mit 3pol. XLR-Buchse, System Cannon.

Kabellänge: 7,5 m.

Anschlußkabel KA 7 UN

(Art.-Nr. 2157)

Kabel zum Anschluß von

Mikrofonen mit 3pol. XLR-3- Stecker, System Cannon, an symmetrische Mikrofonein-

gänge mit 3pol. verschraub- barer Buchse nach

DIN 41 524.

Kabellänge: 7,5 m.

ELECTRET CONDENSER MICROPHONE MKE 80 R

Delivery Includes:handgrip/powenng module K 3 UR microphone module ME 80 R battery dummy MZD 3

tripod mounting MZO 100 windscreen MZW 415
battery 5.6 V PX23

The MKE 80 R is an electret condenser microphone. which is "complete". "Complete" means that the microphone is a ready far use unlt which is specially intended to work with at often

changing recarding places. Only the connecting cable has to be added.

The guaranteed data of the MKE 80 R show that it is a high qualified microphone which meets the high demands to sound quality of professional users.

The MKE 80 R essentlally consists of the handgrip/powering module K 3 UR and the microphone head ME 80 R.

The microphone combines the characteristics of apressure gradient transducer with those of an interference receiver. Its dlrectional pattern far frequencies below 2000 Hz has the shape of a super cardloid pattern and becomes club-shaped for frequencies above 2000 Hz. This directional pattern effi- Clently eliminates all interfering and background noise thus guaranteeing good recardlngs even at larger distances. It should be used far interviews, reporting and in film production.

The second component is the handgrip/powering module, which contalns a 5.6 V battery far powering the microphone module. Besides battery powering, phantom powering is also

possible (12- 48 V).
OperationInserting the battery and battery voltage check

The 5.6 V battery (e. g. Varta 23 PX) is to be inserted according to the label In the battery compartment. The battery contact and function can be checked switching the mlcrophone on and off. If the LED (2) Iights up, the battery has been inserted correctly.

Then the microphone module and the handgrip/powering module are to be assembled.

The condltion of the battery IS checked every time the microphone is sWltched on (red mark visible) ar off. When switching on, a LED (2) lights up, Indicatlng sufficient supply voltage (fig. 4).

If the LED becomes dirn, the battery should be replaced. But there is still areserve of approx. 20 h left - enough time to optain a new battery. The normal operating time with one battery is approx. 600 h. New batteries are avallable from your local dealer. When the microphone is not in use it should be switched off to prevent the battery from belng unnecessarily

drained. For phantom powering the LED serves as an operation control.

8

9