Putting the MKH 8070 into operation
Putting the MKH 8070 into operation
Connecting the microphone
Connection data of the MKH 8070:
•48 V ± 4 V phantom powering (P48, as per IEC 61938)
•
To connect the MKH 8070 to a mixing console or recording device:
Connect the socket of the microphone cable to the microphone.
Connect the connector of the microphone cable to the mixing console or recording device.
Attaching the microphone
Select the suitable mounting thread:
–Without thread insert: 5/8” thread
–Thread insert: 3/8” thread
Screw the microphone clamp 4 to a stand.
Place the microphone with its back end into the microphone clamp: Make sure that the lateral slots are not covered.
Orient the microphone together with the microphone clamp and fix them by screwing the wing screw tight.
4
6 MKH 8070