AF OUT
BAL/UNBAL
DC IN | LEV 6dBu MAX |
12V/150mA |
To mount two central units into a rack:
Place the two central units side by side
Align the jointing plate | over the holes in the bottom sides of the central |
units. |
|
Secure the jointing plate | to the central units using eight of the supplied |
recessed head screws (M 3x6).
Hook the two rack mount “ears” to the front panels of the central units.
Secure the rack mount “ears” to the central units using two of the sup- plied recessed head screws (M 3x6) respectively.
Slide the central units into the 19” rack.
Secure the rack mount “ears” to the rack.
To mount only one central unit into a rack: Hook the two rack mount “ears”
Secure the rack mount “ears” to the central unit using two of the supplied recessed head screws (M 3x6) respectively.
Secure the blanking plate to one of the rack mount “ears” using two of the supplied recessed head screws (M 6x10).
If you are not front mounting the BNC output connector, insert the two
blanking plugs | into the holes of the blanking plate. |
Slide the central unit into the 19” rack.
Secure the rack mount “ears” to the rack.
Connecting the mains unit
Connect the supplied mains unit to the socket (DC IN). Use the cable grip to secure the power supply DC cable.
Connect the suitable adapter to the mains unit .
Connect the mains unit to the mains. The device switches on automatically.
AF OUT
BAL/UNBAL
DC IN | LEV 6dBu MAX |
12V/150mA |
Connecting the amplifier
The audio outputs are available as a balanced
Connect the amplifier/mixing console to the balanced
or the unbalanced BNC output .
For details on balanced or unbalanced connection, see “Connector assign- ment” on page 12.
8
