What to do if...
... the volume is up but you | There is no audio signal available. Check the transmitter |
cannot hear anything: | connection. Is the volume at the headphone socket |
| of your sound source sufficient? |
| Are you still within the transmitter’s range? |
| Is the receiver on the same frequency as the |
| transmitter? |
... the sound is distorted: | The receiver accupack has gone flat, please |
| recharge it immediately. |
| The volume on the receiver is adjusted too high. |
| Reduce the volume. |
... the sound is slightly noisy: | You are about to leave the transmitter’s maximum |
| range. Soon transmission will be interrupted |
| completely. |
| The transmitter’s modulation level is too low. |
| Increase the volume on your sound source. |
... you can hear twittering and | Two transmitters are interfering! |
chirping, and the sound is “squeezed”: Choose a different transmission channel. | |
... the transmitter switches off | The volume on your TV set is adjusted too low. Adjust |
during operation: | the volume on the TV set such that the LED on the |
| transmitter blinks occasionally. |
22
