Testing the headset system and the sound quality
Testing the headset system and the sound quality
Adjusting the headset system using the DIP switches
1Press the Link button on the headset to disconnect an existing wireless link between base station and headset.
The LEDs on the headset and on the base station go off.
2Use a pointed object (e.g. a ball pen) to set the DIP switches to the desired position.
1 | Extra |
| |
|
| ||
| Settings | ||
|
|
| Handset |
|
| 1 | 2 |
|
| DHSG | MSH |
| Fast | Link | Short |
|
|
| |
Lifter | Range |
| Link | OFF | |
Long | o | WidebandStandard | |||
Aut |
|
3 |
| 4 | 5 | 6 | |
Range | Link | ON | wband | Limiter | |
Narro | |||||
Auto |
|
|
|
2
Configuring the handset lifter/hook switch – DIP switches 1 and 2
The DIP switches 1 and 2 are only assigned a function on the SD BS, SD BS ML and SD BS Phone base stations.
Switch position | Function |
Manual operation
Lifts/hangs up the handset manually or using the handset lifter (Sennheiser HSL 10).
Electronic hook switch (DHSG standard)
Call control via the headset system.
For faster link establishment, see Fast Link.
Electronic hook switch (MSH standard)
Call control via the headset system.
Fast Link for DHSG standard and HSL 10 handset lifter
Recommended for frequent callers. Shorter battery life. Fast link establishment without delay due to hidden link to the base station.
14 SD Series – Setup Guide