Sennheiser Set 830-TV Putting the Set 830-TVinto operation, Setting up the transmitter

Putting the Set 830-TV into operation

Setting up the transmitter

Place the transmitter so that:

–there are no obstacles in the light path between transmitter and receiver and

–transmitter and receiver are not exposed to direct sunlight. Direct sunlight may interfere with the recep- tion and may damage the transmitter.

If you are using a plasma TV screen:

Plasma TV screens radiate an infra-red signal that can adversely affect the transmission quality.

Make sure that the transmitter is placed as far as possible from your plasma TV screen.

If necessary, use a standard extension cable with 3.5 mm stereo jack plug to reduce the distance between trans- mitter and receiver. This extension cable is available from your Sennheiser partner.

Note:

One transmitter can be used to transmit to several receivers on the same frequency.