Adjusting settings via the operating menu
Adjusting settings via the operating menu
Make use of the possibility to adjust settings via the operating menu of your receiver and to transfer these settings to the radio microphone.
For more information, refer to the instruction manual of the receiver. The relevant information is marked with the sync icon.
The main menu “Menu”
Adjusting the input sensitivity – “Sensitivity”
Menu |
|
|
|
| Sensitivity |
|
|
|
| Sensitivity | ||||||
|
|
|
|
|
|
|
| |||||||||
Sensitivity |
|
|
|
|
|
| dB |
|
|
|
|
|
| dB | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Call up |
|
|
| Select the desired |
|
|
| Store the setting | ||||||||
“Sensitivity” |
|
|
| setting |
|
|
|
|
|
|
| |||||
“Stored”
Adjustment range: 0 to −48 dB, adjustable in steps of 6 dB
The audio level display “AF” always indicates the audio level, even if the radio microphone is muted, e.g. allowing you to check the adjusted sensitivity before live operation.
B.Ch: 20.12 
533.875MHz
AF P MUTE 
Input sensitivity is |
|
adjusted... | Effect/display |
|
|
... too high | Close talking distances, speakers |
| with loud voices or loud music |
| passages cause overmodulation |
| in the transmission link. |
| The audio level display “AF” |
| shows full deflection for the duration |
| of the overmodulation. |
|
|
... correctly | The audio level display “AF” |
| shows full deflection only during |
| the loudest passages. |
... too low | The transmission link is undermodu- |
| lated. This results in a signal with |
| high background noise. |
|
|
20